Home Salesnet Contact 中文版
    About    Culture    Honors    Products    Equipment    Messages    Contact Us
Product List
  HDPE Uniaxial geogrid
  Asphalt Reinforment Fiberglass geogrid(F'GRID)
  E Glass Woven Rovings
  Biaxial geogrid-PP
  PP Uniaxial geogrid(UX)
  Ultra-high strength Warp Knitted Polyester geogrid
  Non-woven Cloth
  Geogrid for mining
  PP Biaxial geogrid
  High-strength metal plastic BX geogrid
  Composite Geogrids
  HDPE Geomembrane
  Long silk geotextile
  Safety Fence
  E Glass Light Weight Chopped Strand Mat
  Composite geogrid
  Composite Geomembrane
  3D Vegetative Cover Net
  E-glass Fiberglass chopped strand mat
  Warp-Knitted Geocomposite
  Ultra-high strength Warp Knitted Polyester geogrid
  Geocell Room
  Geosynthetic Clay Liner (GCL)
  Polypropylene Fiber-Mesh
  PP Composite reinforcement with grid
  PVC Coated Polyester Geogrid
Contact Us
Mobil: 86 18953802766
Contact: Mr.Zhang
FAX: 086-538-3539777
TEL: 086-538-3536877
MSN: lianyigeogrid1123
Geosynthetic Clay Liner (GCL)
  Geosynthetic Clay Liner (GCL)

It is composed of 3 levels. The upper level and the lower level are woven geotextile and non woven textile. The middle level is bentonite grains, which are carefully selected from Liu Fangzi crude and filled in between the two levels after special processing.

Product characters:
1. Environment friendly
Liu Fangzi GCL is made of natural raw materials of sodium-bentonite.It is raw and natural materials,;aging and corrosion seldom happen. It can keep its quality and then it does not cause any injuries and pollution for human and the environment. It is not only waterproof, but also has good ventilation performance. It can stick up for the exchange of the ecological environment. It is a pure natural, new, green waterproof material.

2. Permanent waterproof, excellent performance
Natural sodium bentonite was formed billions of years ago.
Its waterproof properties are much more durable than that of the buildings. Sodium bentonite would transform to high density septum under hydro pressure. When The thickness is 3mm, the permeability is below a×10-11/sec(a=1~9), which equals to the density of 100 times of the clay with 30 mm thickness. Water retention performance is evident.

3. Easy to construct
Bentonite powder, nails and washers are enough for connection and fixation. Construction is not constrained by weather conditions and it could be taken under cold or wet conditions. Bentonite powder is spread on overlap point. When water comes, GCL would be overlapped automatically. It is so far the only material that starts the waterproof effect by water in the world. It is not necessary to take additional examination when the construction is completed. The repair works are easy in case of waterproof defects. Among the existing waterproof materials, GCL’s construction period is the shortest and its operation is the easiest. It has an eminent effect on shortening the construction period as well as saving the cost.

4. Strong Self-Restore Capacity
The integration between waterproof material and its target enables GCL a 20~28 times swelling volume. Even if concrete structure trembles or subsides, the bentonite in GCL would restore the crack of 2mm or below on the concrete structure immediately. Even if the diameter of perforation reaches 30 mm, the restoration will be finished within 15 days completely.

Waterproof mechanism:
Sodium bentonite is non-metallic clay composed mostly of the mineral montmorillonite. It is formed from volcanic ash and is mined out of Wyoming and South Dakota. Montmorillonite is a layered clay mineral with broad, flat platelets that are ideally shaped to provide a hydraulic barrier. Sodium ions located between these platelets allows water to hydrate the bentonite in a remarkable fashion that results in the high swelling characteristic. Dry sodium bentonite can swell to many times its original volume when exposed to water. Because of its high swelling capability bentonite is able to seal around penetrations, giving geosynthetic clay liners their self-healing characteristic. A fully hydrated layer of sodium bentonite will result in a hydraulic conductivity of less than 5 x 10-9 cm/sec. This is approximately twenty times lower than a typical compacted clay layer.

Standard: 30m×6m., or according to the clients’ demand.
Supplementary material in construction:
1、Bentonite powder: about 22.7kg/bag
2、Bentonite plasm: about 11.2kl/barrel
3、Bentonite Water Barrier:6 rolls/bos, totally 30.5m.

1|、waterproof  for  rooftop garden、basement and so on;
2、waterproof  for underground、railway、city highway、oil drilling and so on;
3、Anti-seepage project of mud and stone reinforce
4、desert and environment improvement、trash stuff zone、artificial lake and artificial sight and so on;
5、reservoir、dam、irrigation channel and so on;

Construction specifications:
1. Before paving, make sure the base plane is even; tamp the ground and clear up the debris in case that GCL be punctured by sharp articles, which in turn affect the waterproof effect. Accumulated water shall be drained in the mean time to avoid GCL being soaked by water.

2. When paving the GCL, determine the direction and position. GCL shall be paved on the base plane according to the direction in proper order and shall be fixed by nails and washers. Nail length is 3040 mm. The distance between two nails is about 400 mm. When paving is undertaken on vertical plane or slopping surface, additional nails and washers shall be added accordingly in order to avoid sliding. Nails are used to fix the edges of overlapping part of GCL; besides, a number of nails shall be added and fixed evenly on the whole GCL according to the flatness. Make sure that GCL is fixed stably on ground and wall.

3. Lap joint. Lap width is between 200 and 250 mm. A bentonite cube with 100mm width and 10 mm height shall be spread between upper and low ends. The joint shall be occluded by bentonite mud. Bentonite cream (bentonite is mixed with water in a ratio of 1;3. After stirring evenly, bentonite cream forms) is applied for occlusion on slope or special point. Make sure there is no drape, miscellaneous soil or other materials on the joint.

4. Special paving. If pipe or wire gets through GCL, first put a whole GCL under the base in accordance with the pipe diameter plus 300mm to strengthen. And then use the bentonite cream to fill in the edge of joint. If confronting break or complicated juncture, cover the whole GCL on the break part or juncture, and then cover the bentonite powder on the lapping parts.

5. After paving, clean up works shall be done. Sand and cement mortar shall be scattered on GCL so as to form a preventive layer. After tamping evenly, the whole paving process is completed. 

Feicheng Lianyi Engineering Plastics Co.,ltd.
Mobil:86 18953802766
Mail:lianyigeogrid@yahoo.com.cn geogrid_tex@yahoo.com.cn
MSN: lianyigeogrid1123@hotmail.com
Factory Site: Feicheng New & High-tech Development Zone, Shandong
You are the visiting guests Privacy Policy