Glassfiber chopped strand mat is a non-woven E-or C-glassfiber mat, product manufactured by spreading continuous filament roving of 50mm in length randomly and uniformly in combination with polyester binder in powder form (or other binder in emulsion form). This product is characterized by good combination of resin, easy operation, good wet strength retention, good laminate transparency and low cost. It is suitable for the applications by hand lay-up FRP moldings, such as: various sheets and panels, boat hulls, bath tubs, cooling towers, corrosion resistant, vehicles etc.

『Properties』：
     1. Good wet-out, Easy to form, easy roll-out and air release.
     2.even  thickness, low fuzz.
     3. Good resistance to watering and chemical agents in anti-corrosion applications.
     4.Very high tensile strength, suitable for filament winding or continuous laminating.
     5.Smooth laminate surface, good laminate transparency.

『Technical characteristics』：

It is a mat with different GSM which made of fiberglass chopped strands with 50mm adding powder or emulsion binder. It is raw material to produce FRP products.

Width: 1m, 1.04m, 1.25m, 1.27m, 1.86m, 2m, 2.6m, 3m, 3.2m

GSM: 100g/m², 200g/m², 225g/m², 300g/m², 375g/m², 450g/m², 600g/m², 800g/m²

Weight per roll depending on the different width: 30kg, 35kg, 40kg, 45kg, 70kg, 80kg

C-glass and E-glass Chopped Strand Mat

Powder and Emulison

Packing:

One 20 container can load 10080kg with width of 1.04m or 9730kg with width of 1.2m, 1.25m or 1.27m.

One 40HC can load 23 tons chopped strand mat.

The loading quantity with pallets can be discussed then.